Publicidad
Idiomas disponibles
Idiomas disponibles
Dispenser
Features
Electronic
Control
Features
OFF
A
A
ON
DISPENSER
FILTERED
ICE & WATER
LIGHT
CHANGEO
f Di,pon,or Operation
|
To dispense
water:
TodispenseJce:
_
_
|
.
_
NOTE: if water dispenser is continuously
•
Select the [_
button,
Select the _
button for cubed ice.
active for more than 2 minutes, an
/
.
_
.
_
automatic lock out sensor will shut down
|
Press container
against
,
Press the I_
button for crushed ice,
power to dispenser area. For instructions
|
dispenser
pad.
.
_
<7_
....
on how to unlock your dispenser
see the
k'ress container
against alspenser
paa.
.
.
,, .
',,
section entitled
Dispenser
Lock
below.
Dispenser
Lock
_--
.'_
This feature prevents ice or water from being dispensed.
_
|
II
To lock and unlock dispenser:
_
/
•
To lock dispenser, press and hold the u,%,_ button for 3 seconds. A green indicator light above button confirms
|
dispenser
is locked.
_
|
•
To unlock dispenser, hold the ,,_L,% button for 3 seconds. Green indicator light above button will go out.
Light
Function
_LIGHT
The light function offers offers two settings: OFF and AUTO.
NOTE: Dispenssrlight will operate at futl
power
IO_OFF 1
The OFF setting will turn off the dispenser cavity light,
when ice or water functions are in use.
_
O _'_",
The AUTO setting allows the SENSOR to measure the surrounding
light levels and adjust the power of the cavity light
accordingly. When the senser registers lower light levels (night time, darkened kitchen), the cavity light will respond at
50% power. When the senser registers high light levels (lighted kitchen, direct sunlight), the cavity light will not activate.
To activate auto setting:
Press the _
button located on contrOr_nel.
To activate the AUTO setting, press the _
button.
When the green indicator light above the button display
To deactivate
light:
Press the _
button located on control panel. Green
indicator light above button will go out.
is on, the cavity dispenser light will use the AUTO setting.
Filter
Status
indicator
Light
FILTER
The filter status indicator light serves as a reminder to replace the water filter. A green light indicates that the
_ooo o
filter is in good condition. A red light indicates the filter should be changed. Once light turns red, it will remain
C.ANOEO
red until function is reset,
To reset indicator:
Press and hold both the ["%'_1and the ["*_1 buttons simultaneously
for 4 seconds. The green filter status indicator
g
d
light will flash 3 times when the function has successfully
reset,
[
Te_pera_.re
_?f_ey_
NOTE: See thesection
No_toAdjustChe
Temperature
_
These keys will lower or raise the freezer or fresh food
Controls for instructions on howto set food compartment
TEMP SET|
compartment
temperature,
temperatures.
V
16
Publicidad
