brondell CIRCLE RC100 Manual De Usuario página 12

PRODUCT INSTALLATION (cont.)
STEP 2A: USING QUICK CONNECTORS
Tube connections on the T-Valve, Drain Clamp, Circle, and Indicator Faucet are all of the "Quick
Connect" variety. The steps below illustrate how to connect and disconnect the Tubes from these
connectors.
a. Push the Tube into the Collette. The Collette is a
collar that provides a secure fit for the Tube and
prevents water leaks.
b. Push the Tube in until it stops. The Tube will
be secure, and resistant to tugs or pulls. The
Collette will be rigid and raised slightly from the
Connector Housing.
c. To disconnect the Tube, push down and hold the
Collette first, and then pull the Tube out gently.
10
Collette
Tube
Connector
Housing