Filtration Process - brondell CIRCLE RC100 Manual De Usuario

FILTRATION PROCESS

THE FOUR-STAGE WATER FILTRATION PROCESS
Stage One: Sediment Filter
The Sediment filter reduces particulate materials such as sand, rust, and fine particles from the water
supply. This first stage also acts as a pre-filter protecting and extending the life of the following filters.
Stage Two: Pre-Carbon Plus Filter
This second stage filter significantly reduces harmful VOCs , chlorine, and soluble contaminants
which can damage the RO Membrane filter.
Stage Three: RO Membrane Filter
The RO filter works by pushing water through a semi-permeable membrane thereby separating
H2O molecules from contaminants in tap water. The powerful RO Membrane significantly reduces
pollutants such as: heavy metals, cysts, fluoride, arsenic, industrial chemicals, and more.
Stage Four: Post Carbon Block Filter
As the final stage in the filtration process, the Post Carbon Block filter further reduces any lingering
water contaminants such as chlorine and volatile organic compounds (VOCs), improving the overall
taste and odor of the dispensed water.
4
Tap
water
Regulator
The RC100 is tested and certified to NSF/ANSI 42, 53 and 58 for the reduction of
Aesthetic Chlorine, Taste and Odor, Cyst*, VOCs, Fluoride, Pentavalent Arsenic,
Barium, Radium 226/228, Cadmium, Hexavalent Chromium, Trivalent Chromium,
Lead, Copper, Selenium and TDS as verified and substantiated by test data. The
RC100 conforms to NSF/ANSI 372 for low lead compliance.
See performance data sheet on page 22 for all certified claims
*NSF/ANSI 58 Cyst reduction of 99.9% based on independent testing not certified by WQA.
Check②
Check①
Regulator
Auto Shut off
Valve
Drain
Dual-Layer
Reservoir
D
Smart
Valve
T
Faucet