Filter Replacement - brondell CIRCLE RC100 Manual De Usuario

FILTER REPLACEMENT

HOW TO REPLACE THE FILTERS
1. Close the T-valve under the sink to shut off the flow of water
to the Circle.
2. Once the T-valve is shut off, turn the Indicator faucet on all
the way and keep it on until the water tank is emptied and
the pressure is released in the system
3. Remove the front cover from the Circle as shown.
4. Turn the filter(s) to be replaced a quarter-turn counter-
clockwise until the unlock arrow on the filter label lines up
with the arrow on filter base above it and then pull down
to remove.
16
Match this to the arrow on the filter base
SEE DIAGRAM ON
FILTER HOUSING ABOVE
1
2
3
4