Roborock S8 MaxV Ultra Manual Del Usuario página 13

D10
Charging Contacts
* Clean as required.
Use a soft, dry cloth to wipe the charging
contacts on the robot and the dock.
D11
Moving the Dock
To move the dock, grip the cord storage slot
on the back with one hand and the inner
side of the front board with the other hand.
Do not lift the base directly to prevent the
dock from falling off.
D12
Dirty Water Tank
* Clean as required.
Open the dirty water tank lid and pour out
the dirty water. Fill the tank with clean water,
close the lid, lock it, and shake. Pour out the
dirty water. Lock the lid and reinstall the tank.
Notes:
• To avoid deformation, only use cold water.
• If any water stains remain on the outside of the
water tank, wipe them with a soft, dry cloth before
reinstalling the tank.
• The lid of dirty water tank is non-detachable.
D13
High-Speed Maintenance Brush
* Clean as required and replace every 6-12 months.
Lift the high-speed maintenance brush
latch and remove the brush. Remove
any entangled objects in the high-speed
maintenance brush and rinse it clean.
Reinstall the brush and latch it in place.
D14
Water Filter
* Clean as required.
Pull out the filter. Press the latch on the side
of the filter to flip it downwards open. Rinse
it with water, use a soft, dry cloth to wipe the
cleaning tank, and then reinstall the filter by
locking the latch. Press down the filter until
you hear it lock with a click.
D15
Cleaning Tank of Edgewise
Mopping Module
* Clean as required.
D15-1— Remove the cleaning tank.
D15-2— Rinse the cleaning tank with water.
D15-3— Reinstall the cleaning tank.
D16
Replacing the Disposable
Dust Bag
* Replace regularly or when it is full.
D16-1— Remove the dust container cover.
Note: To prevent the dust container cover from falling
and hitting the robot, remove the cover with both
hands, one on each side.
D16-2— Remove the dust bag and discard it.
Notes:
• The dust bag handle seals the bag on removal to
prevent leakage.
• Always install a dust bag before putting back the dust
container cover to avoid auto-emptying without the
bag. You can also disable auto-emptying in the app.
D16-3— Clean the filter with a dry cloth,
insert a new disposable dust bag
into the slot, and spread it evenly to
ensure it is installed in place.
13
Note: Make sure the disposable dust bag is properly
installed to avoid waste escaping and damaging the dock.
D16-4— Install the dust container cover
in place to make sure the dust
container is securely sealed.
D17
Battery
The robot is equipped with a built-in high-
performance lithium-ion rechargeable
battery pack. To maintain battery
performance, keep the robot charged
during normal use.
Note: If the robot will be left unused for a long period,
turn it off and charge it at least every three months to
avoid battery damage caused by overdischarge.