Publicidad
Idiomas disponibles
Idiomas disponibles
damaged product repaired before use. Many accidents
are caused by poorly maintained products.
■
Be aware of any hazard presented by the chemical
solutions. Always follow the chemical manufacturer's
instructions on usage, handling, and storage.
■
Do not use the product with any material where the
hazard is not known.
■
Ensure that the spray wand is securely connected
to the spray wand handle before using the product. If
necessary, use pliers to attach the spray wand to the
spray wand handle.
■
Properly replace and tighten the spray tank cover after
pouring liquid into the spray tank.
■
After long time storage or after winter, spray the product
with clean water. Check if there are any leakages or
cracks.
■
Always follow the chemical manufacturer's instructions
printed on their product labelling for use, cleaning, and
storage. Chemicals should be stored out of the reach
of children.
■
To reduce the risk of fire or explosion, do not use the
product with flammable liquids, such as gasoline or other
chemicals with a flashpoint below 55°C.
■
Operate the product only in temperatures between 0°C
and 40°C.
■
Store the product in a location where the ambient
temperature is between 0°C and 40°C.
■
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure that you take regular breaks.
MIXING THE SOLUTION
■
Mix the chemicals strictly in accordance with the
manufacturer's instructions. Incorrect mixtures may
produce toxic fumes or explosive solutions.
■
Never use undiluted liquid plant control chemicals.
■
Prepare the solution and fill the container outdoors or in
well-ventilated areas only.
■
Prepare only sufficient solution for the job in hand so that
nothing is left over.
■
Do not mix different chemicals unless such mixture is
approved by the manufacturer.
FILLING THE CONTAINER
■
Make sure that the container is completely emptied and
cleaned before a different chemical is filled in.
■
Remove the battery pack before filling the container.
Wipe off any spills before installing the battery pack.
■
Stand the product on a level surface, and do not fill the
container above the maximum mark.
■
When filling from the tap, do not immerse the end of
the hose in the chemical solution. Sudden low pressure
in the system may cause the chemical solution to be
sucked back into the water supply.
■
Before filling the container with solution, carry out a test
run with fresh water, and check all parts of the product
for leaks.
■
Make sure that the tank cap is properly closed after
filling.
■
Hang a tag on the product to note the chemical solution
being used.
■
Chemical solutions may be premixed and poured into
the spray tank using a funnel, if necessary.
NOTE: Thoroughly clean and rinse measuring containers
that are used for fi lling the tank and for premixing chemical
solutions.
APPLICATION
■
Work only in the open or in well-ventilated locations,
e.g., open greenhouses.
■
Indoor use is restricted to chemicals that are
recommended by the chemical manufacturer for indoor
use.
■
Adjust the pressure by rotating the cone nozzle or
changing to a fan nozzle.
■
Too high or too low pressure or unfavourable weather
conditions can result in the wrong solution concentration.
Overdosing may damage plants and the environment.
Underdosing may result in unsuccessful plant treatment.
■
To reduce the risk of damage to the environment and
plants, do not operate the product:
●
if pressure is too high or too low
●
in windy conditions
●
in direct sunlight
■
Avoid using the product in freezing weather because the
solution may freeze.
The product may be subject to national requirements for
regular inspection by designated bodies, as provided for in
Directive 2009/127/EC of the European Parliament and of
the Council of 21 October 2009 establishing a framework
for Community action to achieve the sustainable use of
pesticides.
ADDITIONAL BATTERY SAFETY WARNINGS
■
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the tool,
battery pack, or charger in fluid or allow fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
■
Charge the battery pack in a location where the ambient
temperature is between 10°C and 38°C.
■
Store the battery pack in a location where the ambient
temperature is between 0°C and 20°C.
■
Use the battery pack in a location where the ambient
temperature is between 0°C and 40°C.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
To avoid serious personal injury, always remove
the battery pack from the product when cleaning or
performing any maintenance.
■
Do not use flammable solvents or abrasive cleaning
agents to clean the product.
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
Publicidad
