Electrex OPEN ARC 500A Manual De Instrucciones página 6

Options:
OpenArc torch
Connexion cables (5m, 10m or more)
25 Kg wire coil holder (unwinder)
Wire straightener (recommended for 2,8mm hard wires)
4 – TECHNICAL DATA
Parameter
Current scope
Input voltage
Duty cycle
Wire diameter
Motor power
Wire speed
Coil holder capacity
Weight
Dimension (Large x Height x Width)
5 – INSTALLATION
5.1 – Firmly connect the interconnection cables from the power source to the wire feeder.
WARNING : Disconnect power source from mains during the connection of cables. When using a DC generator,
respect polarities.
POWER SOURCE
ou
ou
5.2 – Firmly connect the torch to wire feeder
torch adaptor. Insert plug torch and complete
rotate nut (Fig. 6).
Value
100A – 500A
80V max
100% 400A
1.6 – 2.8 mm
100W
0 – 24 m/min
5 - 15 - 25 Kg
27 Kg
75x67x44 cm
INTERCONNECTION
CABLES
Fig.5
Fig.6
OPEN ARC 500A
WIRE FEEDER
6