Descargar Imprimir esta página

AMATECH JUNIOR POWER-LIFT STIRRUPS Instrucciones De Uso página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 351
INSTRUCTIONS FOR USE
10. Perform a final check to ensure that the patient's heels are properly seated in
the heels of the Boots and that there are no pressure points on the calf. The leg
must be centered in the Boot to eliminate pressure on the peroneal nerve.
Secure the pad. Over tightening the Velcro strap serves no clinical benefit and
can cause damage to the strap/pad. Gently secure the strap to the boot,
never pulling it at an angle.
11. Grasp and squeeze Release Handles and simultaneously move legs slowly to
desired height, maintaining leg symmetry.
12. Once lithotomy level has been achieved, check for pressure points and, if
necessary, make appropriate adjustments.
NOTE: Patient leg position symmetry can be documented using leg length
indicator markings on the Stirrup posts.
3.3 Device controls and indicators:
The indicators below are placed on the sole of each boot.
3.4 Storage, Handling and Removal Instructions:
3.4.1
Storage and Handling:
The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2
Removal Instruction:
a.
Lower Stirrups by grasping and squeezing the Release Handles and
simultaneously down staging the legs slowly to the desired level. A.O.R.N.
Document Number: 80028206
Version: A
All manuals and user guides at all-guides.com
This Symbol represent the patient's right foot.
This Symbol represent the Patient's left foot
Page 14
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E

Publicidad

loading

Este manual también es adecuado para:

Bf855