Dacor DOP36 86D Serie Manual De Instalación página 18

Tools and materials Tools and materials
What's in the box
Parts supplied
Surface burner grates (3)
Flat rack (1)
Wok ring (1)
Temp. Probe (1)
Brass burner caps (6)
18 English
Install_DOP36T86DLS_DG68-01106G-00_EN+MES+CFR.indb 18 Install_DOP36T86DLS_DG68-01106G-00_EN+MES+CFR.indb 18
Burner heads (6) and Burner caps(6)
Anti-tip bracket kit
Gliding rackS (2)
Front leg covers (2)
Convection filter (2)
NOTE
• Make sure you have received all of the supplied parts shown above.
• If your range was damaged during shipping or you do not have all of the
supplied parts, contact your local retailer.
Parts needed
4-wire cord or Gas line
3-wire cord shut-off valve
Flare union adapter 135-degree elbow
½" (NPT) x ½" (ID) (optional)
Tools needed
Flat-blade Phillips
screwdriver screwdriver
Pencil and ruler Level
Utility knife Soapy water solution
Flexible metal
Flare union adapter
appliance connector
¾" or ½" (NPT) x ½" (ID)
½" (ID) x 5 ft
Lag bolt or ½" (OD)
sleeve anchor
Open-end or
Pipe wrench (2)
adjustable wrench
Pipe joint compound Nut driver
2023-02-28 오전 10:19:05 2023-02-28 오전 10:19:05