Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical and grounding safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
•
Do not put a fuse in a neutral or ground circuit.
•
Use a dedicated 240-volt, 60-Hz, 40-amp, AC, fused electrical circuit for this
range. A time-delay fuse or circuit breaker is recommended. Do not plug more
than one appliance into this circuit.
•
Do not connect the ground wire to plastic plumbing lines, gas lines, or hot
water pipes.
•
This range must be Earth grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electrical shock by providing
a path for the electric current. This range is equipped with a cord having
a grounding plug. The plug must be firmly plugged into an outlet that is
properly installed and grounded in accordance with the local codes and
ordinances. If you are unsure whether your electrical outlet is properly
grounded, have it checked by a licensed electrician.
•
Electrical service to the range must conform to local codes. Barring local
codes, it should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the
U.S.) or the Canadian Electrical Code CSA C22.1 – Latest Revisions.
•
It is the personal responsibility of the range owner to provide the correct
electrical service for this range.
Install_DOP36T86DLS_DG68-01106G-00_EN+MES+CFR.indb 7
Install_DOP36T86DLS_DG68-01106G-00_EN+MES+CFR.indb 7
•
Plug into a grounded 3-prong outlet.
•
Do not remove the ground prong.
•
Do not use an adapter or an
extension cord.
•
Do not use a damaged power plug,
power cord, or loose power outlet.
•
Do not modify the power plug,
power cord, or power outlet in any
way.
Installation safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
∗
•
Do not attempt to service, modify, or replace your range or any part of your
range unless it is specifically recommended in this manual. All other service
should be referred to a qualified technician.
•
Always use new flexible connectors when installing a gas appliance. Do not
use old flexible connectors.
•
Make sure the anti-tip device is properly installed on the range. See the
installation instructions for more information.
•
Due to the size and weight of the range, have two or more people move the
range.
•
Remove all tape and packaging materials.
•
Remove all accessories from the cooktop and oven. Grates are heavy. Use
caution when handling them.
•
Make sure no parts came loose during shipping.
•
Have your range installed and
properly grounded by a qualified
installer, in accordance with the
installation instructions. Any
adjustment and service should
be performed only by qualified
gas range installers or service
technicians.
English 7
2023-02-28 오전 10:18:59
2023-02-28 오전 10:18:59
Publicidad
