Publicidad
Idiomas disponibles
Idiomas disponibles
fig. 1
• With welding torch CP 161 DAR, used on units with
interface circuit, the cable AB wires must be always
short circuited.
5.3
REPLACING THE WELDING TORCH BODY
THIS SECTION IS RESERVED TO SKILLED PERSONNEL
ONLY.
8
5.3.1 Replacing the welding torch body CP161 MAR
• Unscrew the 6 screws V Fig.3 and remove the LH
grip.
• With reference to Fig.4, lift the welding torch body T
with cable and disconnect connector A (push-button)
and connector B (pilot arc) making sure that the push-
button components (see Fig. 5) remain in the original
position.
• Remove heat-shrinking hose C and unscrew nut D
Publicidad
