Sirona ATR endoPocket Manual De Instrucciones página 17

Idiomas disponibles

Advanced Technology Research s.r.l.

5. Use

✓ First line: indicates the ﬁ le system in use. The system can be selected using the

Function button.

Second line: indicates the ﬁ le selected. The ﬁ le can be selected using the Files

button.

Third line: indicates the reduction ratio of the contra-angle (default: 6:1) to the

left and the ﬁ le rotation speed (associated with the contra-angle selected) to the

right. Reduction ratio and speed can be modiﬁ ed using the Red and Rpm buttons

respectively.

Fourth line: indicates the stop/autoreverse torque for the ﬁ le selected to the left

and the morphological difﬁ culty (Anatomy) to the right. Torque and Anatomy can

be modiﬁ ed using the Torque and Anatomy buttons respectively.

An: the following are the values that can be selected for Anatomy:

✓ In the event the user changes the reduction ratio, torque and speed on

every ﬁ le, the unit saves the changes. To return to the default parameters,

simultaneously press Function

are memorised if they remain constant for at least 3 seconds.

✓ A/Rev: when the LED is on, the ﬁ le inverts its rotation direction (from counter-

clockwise to clockwise) as soon as the torque set on the display is reached. Lift

your foot from the pedal and press down on the pedal again to return to counter-

clockwise rotation. When the LED is off, the ﬁ le stop as soon as the torque set

is reached. When the ﬁ le reaches 75% of the torque set, the unit emits an

acoustic signal.

Using the A/Rev button, torque, speed and reduction ratio parameters can be

loaded from the memory stick, which were previously personalised and saved by

the user through the Reverse button.

Insert the memory stick in the appropriate USB port on the right side of the unit.

Hold the A/Rev button down until a progress bar appears on the last line of the

E (default): easy. The ﬁ le stop/autoreverse torque is equal to the

value set.

M: medium. The ﬁ le stop/autoreverse torque is equal to the value

set less 15%.

D: difﬁ cult. The ﬁ le stop/autoreverse torque is equal to the value

set less 30%.

and Function

. WARNING: the changes

ndo

ocket

Operating instructions