Ingeteam INGECON SUN 3Play Manual De Usuario página 14

Ingeteam
6. Within seconds, the inverter will automatically recognize the firmware, the inverter will display the
following screen and the update process will begin.
Do not remove the memory card until the firmware loading process is completed successfully.
If the inverter was connected to the grid and injecting energy, it automatically stops until the new
firmware version is operational.
7. Once you have correctly completed loading the firmware a confirmation screen will appear on the display.
In the event it was not successful, a screen will appear reporting the error. In this case, consult section
"Troubleshooting in the firmware loading process".
23/01/2015 23/01/2015
Firmware loaded correctly screen
8. At this point you can remove the SD card pressing it downwards slightly so the inverter ejects from the
slot. In order to maintain the protection rating of the system after performing this task you should always
replace the card reader's protective cover.
9. Once you have removed the card press
10. Check that the installed firmware version on the display has changed to the new version.
Inverter Update Process
1. Check the firmware version installed on the inverter via its display. Click
up the main menu, then select Inverter data. View the version indicated in the FW APP field. The firmware
version will be the XXXXXXX_B type, where _B indicates the version of the file. The first version will be _ and
will continue with _A, _B, ..., AA, AB, AC, etc.
2. Check whether the firmware version available on the internet is newer than that installed in the inverter. If
the version installed on the inverter matches the version available on the internet, it is not necessary to update
the firmware. To check -and download where necessary- the latest firmware, go to the Ingeteam website (www.
ingeteam.com). On the website go to Energy > Photovoltaic energy, go to the section of the inverter model and
14
23/01/2015 23/01/2015
10:17 10:17
to go to the home screen.
23/01/2015 23/01/2015
Firmware update via memory card
10:17 10:17
23/01/2015 23/01/2015
Firmware loaded incorrectly screen
on the home screen to bring
10:17 10:17
ABI2012IQM02_A - User manual
10:17 10:17