Fox FACTORY 34 Manual Del Usuario página 12

COMPRESSION ADJUSTMENT
Use this diagram as a starting point for your compression adjusters. Turn your compression
adjusters to the closed position (full clockwise) until they stop. Then back them out (counter-
clockwise) to the number of clicks shown below.
High-speed compression adjustment is
useful to control fork performance during
bigger hits, landings, and square-edged
bumps.
OPEN
15 CLICKS
OPEN
16 CLICKS
LEAST AMOUNT
OF COMPRESSION
DAMPING; FORK
COMPRESSION
LIGHTEST
GRIP COMPRESSION ADJUST
OPEN
MEDIUM
FIRM
GRIP X COMPRESSION ADJUST
10
CLICKS
OUT
HIGH-SPEED COMPRESSION (HSC)
10
CLICKS
OUT
LOW-SPEED COMPRESSION (LSC)
The 3-Position Micro Adjust lever
is useful to make on-the-fly
adjustments to control fork
performance. Use the positions
between the OPEN, MEDIUM, and
FIRM modes to fine-tune your
compression damping.
Low-speed compression adjustment is
useful to control fork performance during
rider weight shifts, G-outs, and other slow
inputs.
12
CLOSED
(FULL CLOCKWISE)
CLOSED
(FULL CLOCKWISE)
MOST AMOUNT
OF COMPRESSION
DAMPING; FORK
COMPRESSION
FIRMEST