Motorola APX NEXT XN Guia Del Usuario página 22

MN008401A01-AF
Chapter 3: Radio Overview
Function
Multiple Private Line (Conventional
Only)
Nuisance Delete
Private Call (Trunking Only)
Priority Dispatch
Radio Profiles
Record Playback
Rekey Request
Remote Monitor
Repeater Access Button (RAB) (Con-
ventional Only)
Reprogram Request (Trunking Only)
Request-To-Talk (Conventional Only)
Scan
Secure Transmission Select
Site Display/Search (Trunking Only)
Site Lock/Unlock (Trunking Only)
Status (Trunking Only)
Status Call
Talkaround/Direct (Conventional On-
ly)
Text Messaging Service (TMS)
TMS Quick Text
22
Description
Allows you to access the Multiple Private Line lists.
Temporarily removes an unwanted channel from scan list, except
for priority channels and the designated transmit channel.
Allows you to dial the programmed ID (number) and initiate the
Private Call.
Allows you to call the dispatcher on a different talkgroup.
Allows you to access a set of programmed visual and audio
settings of the radio.
Allows you to saves and playback recorded calls.
Notifies the dispatcher that a new encryption key is needed.
Enables the system administrator to remotely command a targe-
ted radio.
Allows you to manually send a repeater access codeword.
Notifies the dispatcher that a new dynamic regrouping assign-
ment is needed.
Notifies the dispatcher that you want to send a voice call.
To turn on or off the scan function, press the button.
To enable Scan List Programming and selects the scan list for
editing, press and hold the button.
NOTE: If this function is programmed to a radio switch,
you cannot change the scan mode on the Radio Quick
Settings menu.
Toggles the Secure Transmission on and off when the Se-
cure/Clear Strapping field is set to Select for the current chan-
nel.
To display the current site ID and Received Signal Strength Indi-
cator (RSSI) value.
To perform site search for Automatic Multiple Site Select (AMSS)
or SmartZone operation, press and hold the button.
Allows your radio to lock onto a specific site.
Sends data calls to the dispatcher about a predefined status.
Sends data calls to the dispatcher about a predefined status.
Toggles between using a repeater or communicating directly with
another radio.
NOTE: If this function is programmed to a radio switch,
you cannot change the talkaround/direct mode on the
Radio Quick Settings menu.
Allows you to access the Text Messaging Service (TMS) menu.
Selects a predefined message.