MN008401A01-AF
Chapter 9: General Radio Information
●
The radio minimum audio volume and alert tone volume is set to at least 64db.
NOTE: To activate HZM on the radio, HZM Personality must be enabled in RadioCentral or Customer
Programming Software (CPS).
9.6.1
Enabling Hazard Zone Mode
Procedure:
Turn the 2-Position Concentric Switch to On.
The following symbols indicate the On and Off status of the 2-Position Concentric Switch.
Table 15: On and Off Status of the 2-Position Concentric Switch
Symbol
Your radio shows the following indications:
●
The front display shows Hazard Zone Mode On.
●
The top display shows a Hazard Zone Mode activation string and icon.
9.6.2
Disabling Hazard Zone Mode
Procedure:
Turn the 2-Position Concentric Switch to Off.
The following symbols indicate the On and Off status of the 2-Position Concentric Switch.
Table 16: On and Off Status of the 2-Position Concentric Switch
Symbol
Your radio shows the following indications:
●
The front display shows Hazard Zone Mode Off.
●
The top display shows a Hazard Zone Mode deactivation string.
60
Status
Off status
On status
Status
Off status
On status