MN008401A01-AF
Chapter 13: Emergency Operation
●
The display shows Emergency Alarm Received.
NOTE: The emergency receive alerts and calls tone are at the maximum volume when the radio is in
Hazard Zone Mode (HZM). When you are in this mode and you receive an emergency alarm, the
volume level is not adjustable.
Procedure:
To dismiss the received emergency alarm, tap the DISMISS button.
13.7
Receiving Emergency Alarms with Emergency
Calls
When you receive emergency alarms, your radio shows the following indications:
●
The LED blinks red.
●
The display shows Emergency Call Received.
NOTE: The emergency receive alerts and calls tone are at the maximum volume when the radio is in
Hazard Zone Mode (HZM). When you are in this mode and you receive an emergency alarm, the
volume level is not adjustable.
13.8
Exiting Emergency Operation
If an Emergency operation is triggered on your radio, the dispatch console or radios configured as Supervisor
can exit the Emergency operation.
Procedure:
Perform one of the following actions:
If...
13.9
Exiting Emergency as Supervisor (Trunking Only)
Radios configured as Supervisor are able to cancel emergency mode of other radios. The dispatch console
must be preprogrammed to use this feature. For more information, contact your system administrator.
70
Then...
Press and hold the preprogrammed Emergency button until you
hear the emergency exit tone.
a. From the Home screen, swipe down the Status Bar.
b. Tap Cancel and confirm the action by tapping Yes.