Publicidad
Idiomas disponibles
Idiomas disponibles
Installation, continued
B Attach the Cable Covers
@ Align the top part of the back cable cover with the monitor and press the part of the cover shown
in the diagram to fit the cover into position
Make sure that both right and left tabs on the lower section of the back cable cover are securely
locked in the holes of the monitor
(2) Carefully raise the face of the monitor to its normal vertical positioning and press the cable
through the channel on the side of the stand
(3) Attach the left and the right cable cover by positioning it so that the arrow mark is up and pointing
to the side of the monitor
Caution
* Do not damage the cable when attempting to plug it in
* When attaching the cable covers, be sure that cable has not become caught between the
cover and the monitor
B Use Headphones
Prepare the headphones (commercially available) and connect as shown in the illustration below
Caution:
* Lower the volume if howling occurs
JL
Y
—
©
P
"n
Publicidad
