Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustment Item Screen
«> RECALL
Return to the initial settings (the settings at the time of factory shipment).
1) When the (1] key (Yes) is pressed, the settings are recalled and the menu screen returns.
(Recall = return to initial settings (settings at time of factory shipment))
2) When the [2] key (No) is pressed, the menu screen returns without the settings being
recalled. (The settings return to what they were immediately before the recall.)
If there are no operations performed for about 30 seconds, the screen goes off without a recail.
€ LANGUAGE
Select one of the languages (German, French, English, italian or Spanish) for the on-screen
ENG
display.
DEU:
German
FRA:
French
ENG:
English
ITA : Italian
ESP:
Spanish
OSD POSITION
Adjust the position that the on-screen panel is to be displayed.
Select the position 1 to 5 with "8" and "B®" keys.
©%
INPUT SELECT
This displays the screen mode input on the LCD monitor and the input signal port, USB port,
and audio input port can be switched over among them.
The horizontal and vertical synchronization frequency are displayed.
The values for horizontal and vertical synchronization frequency of the video signal that is
currently input for the computer are displayed.
fH: There is an error of approximately 0.2 kHz max. for 30 kHz and 0.4 kHz max. for 82 kHz.
1) Select GJ, (PORT), EL (use) Ely (AUDIO) with the [2] key.
2) Select the interlocking D-Sub, port A, port B with "E€" and "BP" keys.
Note:
If the interiocking D-Sub (El /
) is selected, when selecting A at input signal port, A
will also be selected for the USB port and audio input port and when selecting B at input
signal port, B will be selected for the USB port and audio input port. To use different ports,
make settings in the appropriate ports.
Direct operation:
Even if the menu screen does not appear, the input select can be adjusted by pressing the [2]
key.
Note) When switching the USB Upstream, check to make sure that the enumeration
routine has been successfully completed. If the enumeration routine has not
executed successfully, the USB and /.or.the computer may not function correctly.
P: SOUND MENU
Adjust the sound quality.
1) Select $ (TREBLE), 9° (BASS), i (SURROUND) with the [2] key.
2) Adjust the tone to match personal preference with "F8" and "BP" keys.
17
Publicidad
