GB
MT
by a professional. Only use
original parts. Allow the de-
vice to cool off before any
maintenance or cleaning is
undertaken. There is a risk of
burning!
Always check the device before using it for
obviousdefi cienciessuchasloose,worn
or damaged parts, correct the positioning
of screws or other parts. Examine the cut-
ting/grinding disc in particular. Exchange
the damaged parts.
Cleaning
Do not use any cleaning agent or
solvent.Chemicalsubstancescan
etch the plastic parts of the device.
Never clean the device under run-
ning water.
• Thoroughlycleanthedeviceafterevery
use.
• Cleantheventilationopeningsandthe
surface of the device with a soft brush
or cloth.
Storage
• Store the appliance in a dry place well
out of reach of children.
• Cuttingdiscsmustbedryandstored
upright and should never be stacked.
• Before prolonged storage, remove the
rechargeable battery from the device
and charge it fully.
• Thestoragetemperaturefortherechar-
geable battery and the device is bet-
ween0°Cand45°C.Avoidextreme
cold or heat during storage to ensure
the battery output is not adversely affec-
ted.
42
Waste disposal
and environmental
protection
Remove the rechargeable battery before
disposingofthedevice!
Thedevice,accessories,batteryandpa-
ckaging should be properly recycled.
Electrical machines do not belong
with domestic waste.
Do not throw batteries into domestic
waste,fi re(riskofexplosion)orwa-
ter. Damaged batteries can harm
the environment and your health if poiso-
nous fumes or liquids escape.
• Hand over the device at an utilization
location.Theplasticandmetalparts
employed can be separated out and
thus recycled use can be implemented.
AskourService-Centerfordetails.
• Defective or used batteries must be
recycled in accordance with Directive
2006/66/EC.
• In accordance with the Directive
2012/19/EU on waste electrical and
electronic equipment, used electrical
devices must be collected separately
for disposal and recycled in an environ-
mentally sound manner.
Depending on the implementation in
national law, you may have the fol-
lowing options:
- Return to a shop,
- Returntoanoffi cialcollectionpoint.
For more information, please contact
your local waste management provi-
der or our service centre.
- Return to the manufacturer/distribu-
tor. We will dispose of any defective