Control Techniques Commander SE11200025 Guia Del Usuario página 23

187.5mm
375mm
14.764in
The drive should be mounted vertically. A mounting template is provided on the
NOTE
drive packing carton to aid installation.
When surface mounting a model size 5, allow a clearance of 150mm (6in) above
NOTE
the drive; this is for dismounting. A minimum clearance of 100mm (4in) is
required for ventilation.
375mm
14.764in
Use M6 x 12mm max. (or equivalent) thread-forming screws to screw into holes in the
heatsink, or tap the holes to a suitable thread size.
Commander SE User Guide
Issue Number 9
335mm 368mm
13.189in 14.488in
7.382in
Figure 4.2 Surface mounting Size 5 units
335mm 364mm
13.189in 14.331in
Figure 4.3 Through-panel mounting Size 5 units
www.controltechniques.com
Back-plate
260mm
10.236in
16.5mm
0.650in
Back-plate
287mm
11.299in
7mm 16mm
260mm
10.236in 0.276 0.630
in in
131.5mm
140mm
120mm
4.724in 5.512in
45mm
1.772in
346mm
13.622in
175mm
6.890in
16.5mm
16.5mm
0.650in
0.650in
16.5mm
0.650in
345mm
13.583in
69mm 69mm
2.717in 2.717in
187mm
5.177in 7.362in
358mm
14.094in
23