Publicidad
Idiomas disponibles
Idiomas disponibles
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you're not selecting any cooking zone.
Touch "+" the controls of the timer. The
minder indicator will start flashing and "10"
will show in the timer display.
3. When the time is set, it will begin to count
down immediately. The display will show
the remaining time and the timer indicator
will flash .
b) Setting the timer to turn one or more cooking zones o
Set one zone
1. Touching the heating zone slider control.
3. When the time is set, it will begin to count
down immediately. The display will show
the remaining time and the timer indicator
flash.
NOTE: The red dot next to power level
indicator will illuminate indicating that
zone is selected.
Other cooking zone will keep operating if they are turned on previously.
2. Set the time by touching the "-" or "+"
control of the timer
Hint: Touch the "-" or "+" control of the
timer once to decrease or increase by 1
minute.
Touch and hold the "-" or "+" control of
the timer to decrease or increase by 10
minutes.
4. Buzzer will beep for 30 seconds and the
timer indicator shows "- -" when the
setting time finished.
2. Set the time by touching the or control of
the timer Hint: Touch the "-" or "+" control
of the timer once will decrease or increase
by 1 minute.
Touch and hold the "-" or "+" control of the
timer will decrease or increase by 10
minutes.
4. When cooking timer expires, the corre-
sponding cooking zone will be switched
o automatically.
20
Publicidad
