Char-Griller Smokin' Pro Manual Del Usuario página 12

Step 3
Lay the cart assembly down with the Long Legs on the floor then install the Wheels and Wheel Axle.
On one end of the Axle insert the Cotter Pin into the hole on the Axle and snap in the Hub Cap. Slide
one Flat Washer and one Wheel onto the Axle then slide the Axle through the holes on the Short Legs
and Bottom Shelf. Complete the assembly by sliding the other Wheel and Flat Washer onto Axle then
insert the Cotter Pin and snap on the Hub Cap.
Hub Cap
Wheels
Wheel Axle
Wheel
Cotter Pin
Hub Cap
Hub Cap
Axle
Washer
1224_OM_B.5
B-5 5