Hayward AquaRite UV Low Salinity Manual Del Usuario página 35

The device is designed to be connected to a protected outlet at all times. The AquaRite
unless the pool equipment is undergoing maintenance or the pool is to be closed (wintering).
If the water parameters are within the recommended ranges, the device can be started up.
5a. View and description of the home screen
Hydrolysis - Intensity in %
Filtration stopped or insufficient flow
Max. pH set point (Acid)
Peristaltic pump operation
Maximum injection time reached
Filtration stopped or insufficient flow
Updated free chlorine measurement
Filtration stopped or insufficient flow
Free chlorine sensor flow error
5b. Commissioning of the device
5. OPERATION
Available relays
Time
On/Off button
Flow
7.2
on/off
AL3
FL1
Electrolysis operation
on/off
0.00
Free chlorine setpoint
1.00
FL1
FL2
Menu access
Choose your preferred language
and confirm using the OK
button.
AquaRite UV LS
®
Only use spare parts supplied by Hayward brands
UV LS must not be disconnected
®
Polarity 1
Pol 1
Production automatically reduced
Cover
to % selected (20% by default)
Wait time
---
Insufficient salt / cell scaled up or to be replaced /
LOW
water temperature too low
Operation
on/off
Maximum setpoint of ORP
700
Filtration stopped or insufficient flow
FL1
Updated conductivity measurement
3000
Maximum conductivity setpoint
5000
Filtration stopped or insufficient flow
FL1
Lighting status and programme
Filtration status and programme
State of UV module (On/Off)
Confirm the current time and
date using the OK button.
Page 11 on 22
®
Polarity 2
Pol 2