Hayward AquaRite UV Low Salinity Manual Del Usuario página 43

8
6h. Installing and starting up a variable-speed pump
•
To install and control a 3-speed pump, please contact your dealer.
H I J
Diagram of variable-speed pump installation on the AquaRite
1 2 3
1 2 3
9 10
K L M
4 5
4 5
AquaRite UV LS
®
Only use spare parts supplied by Hayward brands
11
•
When the module is connected to the Wifi network and
the two LEDs are continuously on (steady), you can register at
poolwatch.hayward.fr or on the Hayward Poolwatch app.
Get your Node ID (steps
process. You can scan the QR code directly in the app to register
your pool. Once you have registered, you can monitor all your
AquaRite
O nly WiFi networks with a frequency of 2.4 GHz are
accepted by the module.
Thermal circuit breaker / Switch
red
Pump
UV LS
®
6
3
Enter the service menu from
the configuration menu.
4
Enter the password (contact
your dealer to obtain the
password).
5
Enter the pump type menu.
6
Select the type of pump.
The default pump type is
"standard" (single-speed).
When using a variable-speed
6 6
After connecting a variable speed pump, you can assign a
different speed individually to each filtration period, as required.
V1: S, V2: M, V3: F
Filter cleaning: To clean the filter with a variable speed pump, it is
best to use the highest speed (V3).
Page 19 on 22
®
8 to 11) and follow the registration
UV LS parameters remotely with Hayward PoolWatch.
®
V1
N
V2
O
V3
P
black
Q
•
Cable must
be added
pump, select variable speed
A, B or C. In this case, one
of the 3 default speeds (V1,
V2, V3) can be assigned to
the heating and for when the
cover is closed.
i
Select Var. speed A for a
Hayward variable-speed
pump.