Descargar Imprimir esta página

Altrad Belle RPC 60/80D Manual Del Operador página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
Safe Disposal.
Instructions for the protection of the environment. The
machine contains valuable materials. Take the
discarded apparatus and accessories to the relevant
recycling facilities.
Problem
Engine will not start.
Engine still will not start.
Unit will not move.
Forward speed too slow.
Reverse speed too slow.
Loss of Hydraulic Oil.
Machine operates
erratically.
Environment
Trouble Shooting Guide
Cause
No fuel.
Engine switched off.
Spark plug fouled.
Engine cold.
Engine ooded.
Major Fault.
Engine speed too slow.
Drive belt tension loose.
Air lter blocked.
Worn or Damaged Clutch.
Drive failure.
Gearbox failure.
Too much oil in hydraulic head.
Wrong adjustment of control system
Not enough oil in hydraulic head.
Air in control system.
Wrong adjustment of control system
Connectors leaking.
Defective hydraulic hose.
Piston seal in gearbox defective.
Shock mounts damaged.
Component
Handle
Front cover
Main frame
Baseplate
Hand Grips
Engine
Flexible Mounts
Various Parts
Remedy
Open fuel tap.
Fill fuel tank.
Switch engine on.
Clean and reset plug gap.
Close choke.
Honda, open choke, fully open throttle, pull recoil starter
until engine res.
Hatz, move speed control to stop, pull recoil starter 5 times
then repeat start procedure.
Contact Agent or Altrad Belle.
Set engine speed control to fast.
Adjust belt tension
Clean or renew air lter.
Repair or Replace as necessary.
Contact Agent or Altrad Belle.
Contact Agent or Altrad Belle.
Reduce oil level.
Contact Agent or Altrad Belle.
Fill and bleed system.
Bleed control system.
Contact Agent or Altrad Belle.
Reseal connectors.
Replace hose.
Contact Agent or Altrad Belle.
Replace all four mounts.
11
GB
Material
Steel
HDPE
Steel
Steel
Polyurethane Foam
Aluminium
Steel and Rubber
Steel and Aluminium
GB

Publicidad

loading

Este manual también es adecuado para:

Rpc 60/80Rpc 60/80de