Publicidad
Idiomas disponibles
Idiomas disponibles
C
C
Repair instructions
LED display in normal operation
• Should a malfunction occur, the corresponding LED indicator will indicate a display combined
with an error code (looped display).
• During normal operation, the corresponding LED indicator is on, indicating the current
operating mode of the refrigerator.
• If you have problems with your appliance or if you think that it does not work properly, there a
few simple checks you can do before calling customer service by referring to the following table:
CAUTION : Do not try to repair the appliance yourself.
If the problem persists after checking the points below,
contact a qualified electrician, authorised service
technician, or the shop where you purchased the
appliance.
Problems
The appliance does not
work properly
Smells in the drawers
The appliance makes a
noise
Practical information
Informations pratiques
• Check that the power cable is properly connected.
• Check the fuse or circuit of your power supply and replace
it if necessary.
• The ambient temperature is too low. Try to increase the room's
temperature.
• The interior may need to be cleaned.
• Some foods, containers or packaging may cause odours.
• The following noises are quite common:
- Working compressor noise.
- Clicking noise before the compressor starts.
• Other unusual noises due to the following reasons may require
your intervention:
- The appliance is not level.
- The back of the appliance touches the wall.
- Bottles or containers roll or fall.
17
17
Possible causes and solutions
EN
FR
Publicidad
