ELICA PRF0183894 Montaje Y Modo De Empleo página 15

T. Function
1 Hob ON/OFF
Selection of the cooking zones / Cooking zone dis-
2
play
3 Increase/Decrease cooking power level
Display cooking power level
4 Activate "STAND ALONE" timer
Display: "STAND ALONE" timer / Cooking Zones
Timer.
Increase/Decrease "STAND ALONE" Timer time /
5
Cooking Zones timer
6 Activation of Cooking Zones Timer
Indicator of Cooking Zones Timer active
7 Automatic Heat Up Activation.
Temperature Manager activation (Warming Func-
8
tion)
9 Pause
10 Key Lock
11 Power Limitation selection
THINGS TO KNOW BEFORE STARTING
This manual describes the main functions. Use the QR
code at the start of the manual to access the full
instructions online. All functions of this hob comply with the
most stringent safety regulations. For this reason:
• Some functions will not be activated, or will be
automatically deactivated, in the absence of pots on
the burners or when they are poorly positioned.
• In other cases the activated functions will be automatically
deactivated after a few seconds, if the specific function
requires a further setting that has not been selected (e.g.:
"Turning the hob on" without "Selecting the cooking zone"
and the "Operating temperature", or the "Lock Function" or
the "Timer" function).
Wait for the display to turn off before approaching the
cooking zone.
COOKING ZONE DISPLAY
The following is shown on the cooking zone displays:
Function
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Bridge Zone Function active
Temperature Manager Function active
Pause function
Automatic Heat UP function
CHARACTERISTICS OF THE HOB
● Safe Activation
The product is activated only in the presence of pots on the
cooking zone: the heating process does not start or is
interrupted if there are no pots, or if these are removed.
● Pot Detector
The product automatically detects the presence of pots on
the cooking zones.
● Safety Shut Down
For safety reasons, each cooking zone has a maximum
operating time, which depends on the power level set.
● Residual Heat Indicator
When switching off one or more cooking zones, the
residual heat is indicated with a specific visual signal on the
display of the corresponding zone by the symbol
USING THE HOB
Note: Before activating any functions, the desired zone
must be enabled
● Power-on
Briefly press (touch)
lights up; If you continue to press: all the available
functions will become visible for a few seconds, after which
only the main ones will remain active; the other ones can
be used, and will be activated, later, while using the device.
IMPORTANT:
illuminated with light intensity, which will become
more intense only when they are activated.
Press again to turn off
Note: This function has priority over the others.
● Selecting the cooking zones
Briefly press (touch) the Selection/Display (2) area
corresponding to the desired cooking zone.
● Power Level
The hob features 9 power levels. Touch and slide your
fingers along the Selection bar (3):
Value
to the right to increase the power level;
to the left to decrease the power level.
The power level set will be displayed in the Selection/
Display area (2)
● Power Booster
The product features a supplementary power level (after
level ), which remains active for 5 minutes, after which
the temperature returns to the previously set value.
Touch and slide your fingers along the Selection bar (3)
15
ON/OFF (1) hob: the symbol
all the available functions will be
.