Descargar Imprimir esta página

Parkside PMRA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 48

Traducción del manual de instrucciones original

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 140
GB MT
• Cut injuries if suitable gloves
are not worn.
Warning! During operation,
this power tool produces an
electromagnetic fi eld. Under
certain circumstances, this
fi eld may negatively affect
active or passive medical
implants. In order to reduce
the danger of serious or fa-
tal injuries, users who wear
medical implants must consult
their doctor and the manu-
facturer of the implant before
operating the machine.
Installation
Refer to the separate installation
manual for a detailed description.
Required tools
(not included in delivery):
-
Phillips screwdriver
-
Wire stripper
-
Measuring tape
-
Hammer
-
Optional: Drill, drilling machine, two
dowels, two screws (>M5)
Do you need support? We offer
an installation service. Find out
more on our website:
www.grizzlytools.de/service/maehroboter-
installationsservice
Preparation
Regularly check the lawn for stones,
branches, wires and debris that
could cause damage to the device and
blades.
48
1. Sketch the garden.
2. Charge the battery (32).
3. Press the rulers out of the box.
Fastening the power supply
unit
Do not store the power sup-
ply unit lying directly on the
ground.
• The power supply unit should be
placed at a height inaccessible to chil-
dren (e.g. 160 cm).
• The screw head can have a diameter
of 7 - 10 mm.
1. Mark two drill holes with a pencil or
similar.
2. Drill the holes with a drill bit suitable
for the material.
3. Press two dowels into the drill holes.
4. Attach the power supply unit to the wall
with two screws.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices to fi nd
these or consult an installation plan
for guidance. Contact with electrical
cables can lead to electric shock
and fi re. Contact with a gas line
can result in an explosion. Damage
to a water pipe can lead to proper-
ty damage and electric shock.
Assembling the charging
station
Illustration
1. Place the charging unit (22) with the
two lugs fi rst into the baseplate (21) of
the charging station.
 :

Publicidad

loading