Publicidad
Idiomas disponibles
Idiomas disponibles
Working instructions
Regular mowing stimulates the grass to an
increased leaf formation, while at the same
time killing weeds. As a result, the lawn
becomes denser after each mowing and
an evenly resilient lawn is created.
The first cut takes place roughly in April
when the grass is about 7 - 8 cm high. Dur-
ing the main growing season, the lawn is
mowed at least once a week.
Setting the cutting height
Switch off the device and wait for
the blades to come to a stop. There
is a risk of personal injury.
1. Open the cover (1).
2. Set the rotary wheel (2) to the desired
cutting height.
3. Close the cover (1) again.
The device can be adjusted in 15 steps to
a cutting height between 25 - 60 mm.
The correct cutting height is between 30
and 45 mm for an ornamental lawn and
about 30 to 65 mm for a utility lawn.
A high cutting height should be se-
lected for the first cuts in the season.
Manually interrupting/
starting the operating cycle
Interrupting operation
Press the STOP button (9) to stop the mow-
er during operation.
Starting/resuming operation
1. Open the cover (1).
2. Confirm the selection with the OK but-
ton (7).
3. Unlock the display (10) with the 4-digit
PIN.
4. Press the start button (3).
5. Close the cover (1) again.
The lawn mower starts the set operat-
ing cycle or resumes its previous activi-
ty without interruption.
Operation
Setting the language
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit
PIN.
3. Press the OK button (7) to enter the
main menu.
4. Use the arrow buttons (6) to select "Set-
tings" (Settings).
5. Confirm the selection with the OK but-
ton (7).
6. Use the arrow buttons (6) to select "Lan-
guage" (Language).
7. Confirm the selection with the OK but-
ton (7).
8. Use the arrow buttons (6) to select the
desired language.
9. Confirm the selection with the OK but-
ton (7).
10. Return to the main menu with the back
button (5).
Switching on and off
Switching on the lawn mower
(Fig.
)
1. Press and hold the START button (3)
for approx. 3 seconds until the display
(10) lights up.
2. Enter the 4-digit PIN. You will find
which buttons correspond to which
numbers in the section "Settings".
3. Press the OK button (7) to enter the
main menu.
GB MT
55
Publicidad
