Publicidad
Idiomas disponibles
Idiomas disponibles
Connect the units to the power supply distributor
NOTE
Ensure that the total outlet output of 12 A (2700 W) is not exceeded. Otherwise the unit will be
damaged.
NOTE
The dimmable socket contains a phase-angle dimmer that can control inductive and ohmic loads.
Inductive loads are, for example, dimmable LEDs, but also some OASE pumps that are desig-
nated for dimming.
Ohmic loads are, for example, incandescent lamps.
If you connect capacitive loads (e.g. electronic transformers), ...
this can destroy the internal dimmer.
this can destroy the connected unit.
the connected unit will not function properly.
If you are not sure, check with the manufacturer of the product that you want to dim.
Note that the dimmable socket cannot be switched off completely. This means a small cur-
rent is always flowing even with a dimmed down unit.
26
1
Socket 1, switchable (max. 2000 W)
2
Socket 2, switchable (max. 2000 W)
3
Socket 3, switchable (max. 2000 W)
4
Socket 4, switchable and dimmable (40 ... 320 W)
Publicidad
