Publicidad
Idiomas disponibles
Idiomas disponibles
GB
4. Initial setup
1. Stick the stickers enclosed with the tank docu-
ments permanently and firmly to the tank.
A
B
C
Labelling DT-Mobil Easy both sides
A
UN 1202 for diesel
Hazard label
B
(flame on red background)
Harmful to the environment
C
(dead tree/dead fish symbol)
2. Fill the tank (see section 5.4). Unscrew the cap
on filling nozzle
B
B
delivery nozzle with an automatic shut-off.
3. Perform a test filling as described in section
5.5, but hold automatic delivery nozzle
still-open filling opening
4. After completing the test filling, seal the filling
opening tightly using the cap.
►The filling station is now ready for operation.
36
(front and back)
. Refill the container using a
H
H
.
B
B
5. Operation
5.1
Storage
During transport and storage, do not expose the
DT-Mobil Easy to direct sunlight for an extended
period of time. Excessive heating can lead to a
reduction in the quality of the fuel.
If overpressure occurs in the closed container as a
result of heating, it is released via relief valve
i
Important:
Do not stack filled tanks on top of each
other!
Suitable storage conditions:
•
Ambient temperatures from -10 °C to +40 °C.
•
Level surface.
•
Cover for outdoor storage.
•
Stackability: max. two empty tanks
5.2
Loading the filling station
Risk of injury.
The lid must be closed.
i
Important:
Close ball valve
5.2.1
Loading by hand
Empty DT Mobil Easy systems can be loaded by
hand using the recessed grips on the sides of the
tank. Note the weights of the empty stations:
95 kg - 143 kg
in
on the delivery line.
C
C
Figure 5.2.1: Recessed grip
.
E
E
Publicidad
