Publicidad
Idiomas disponibles
Idiomas disponibles
The induction hob
makes a slight
buzzing sound
when used at
high power
Fan noise from
the induction hob
Cookware does
not heat up and
does not appear
on the display
The induction
hob or a cooking
area has turned
off unexpectedly,
emits a sound
and an error code
is displayed
(usually
alternating with
one or two digits
on the cooking
timer display)
The induction hob is fitted with a self-diagnostic function. With this function, the technician
can check the operation of different components without de-installing the induction hob from
the worktop.
This is due to the induction
cooking technology.
A cooling fan integrated
in this induction hob has
been activated to prevent
overheating of the electronic
components. It may still
operate even after turning off
the induction hob.
The induction hob does not
detect the cookware because
it is not suitable for induction
cooking.
The induction hob does not
detect the cookware because
it is too small for the cooking
zone or is not centred in it.
Technical fault.
It is usual, but the noise should
decrease or completely disappear by
lowering the power setting.
This is usual and you do not need to
worry. Do not unplug the hob from
the mains if the fan is still running.
Only use cookware designed for
induction hobs. Check the 'Selection
of the suitable cookware' section
Centre the cookware and make sure
its base matches the size of the
cooking area.
Write down the letters and numbers
of the error, disconnect the induction
hob from the mains and contact the
official Cecotec Customer Service.
BOLERO SQUAD I 3250
ENGLISH
73
Publicidad
