Technical Specifications; Helpfull Tips - Topcom BPM WRIST 3301 Manual De Usuario

TOPCOM BPM WRIST 3301
3

TECHNICAL SPECIFICATIONS

Power source
Measurement method
Measurement zone
Accuracy
Pressure sensor
Inflation
Deflation
Memory capacity
Auto-shut-off
Operation environment
Storage environment
Weight
Wrist circumference
Limited patient
Dimensions
K.B.
Classification
* Specifications are subject to change without notice.
4

HELPFULL TIPS

Here are a few helpful tips to help you obtain more accurate readings:
• Do not measure your blood pressure immediately after consuming a
large meal. To obtain more accurate readings, please wait one hour
before measuring.
• Do not smoke or drink alcohol before measuring your blood pressure.
• You should not do be physically tired or exhausted while taking a
measurement.
• It is important that you relax during measurement. Try to take 15-
minutes rest before a reading.
• Do not take measurements if you are under stress or under tension.
• Take your blood pressure at normal body temperature. If you are
feeling cold or hot, wait a while before taking a measurement.
• If the monitor is stored at very low temperature (near freezing), have it
placed at a warm location for at least one hour before using it.
• Wait about 5 minutes before taking the next pressure measurement.
3V DC: Two LR03 (AAA) Non-Rechargeable batteries
Oscillometric
Pressure: 20~280 mmHg
Pulse: 40~180 beats/minute
Pressure: ±3 mmHg
Pulse: within ±5% of reading
Semi-conductor
Pump driven
Automatic Pressure release valve
30 memories for each zone
3 minutes after last key operation :
10°C~40°C(50°F~104°F)
40~85% RH max.
-5°C~60°C (23°F~140°F)
10~95% RH max.
130g (without batteries)
13.5~19.5cm(5.3"~7.7")
Over 18 years old
81(L) x 78(W) x 78(H) mm
Short time operation 3 minutes.
Classification of type BF
5