Time Adjustment; Technical Specifications - Topcom BPM WRIST 3500 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
TOPCOM BPM Wrist 3500
10.4

Time adjustment

To adjust the date an time:
Press the START/STOP
month will blink on the display.
Press the MEMORY button
Press the START/STOP button
blink on the display.
Change the day, hours and minutes as described above, using the
MEMORY button
confirm every setting.
After setting the minutes, the device is ready to use.
11

Technical specifications

Model No.
Measurement
Inflation
Memory capacity
Range
Accuracy
Power Supply
Auto Power Off
Operating Temperature
Operation Humidity
Storage Temperature
Storage Humidity
Weight (exclude batteries)
External Dimensions
Cuff size
Limited patient
Classification
*Specifications are subject to change without notice.
10
and MEMORY button simultaneously. The
successively to change the month.
to confirm the month. The day will
to change and the START/STOP button
BPM Wrist 3500
Oscillometric
Automatic inflation with pump
3 Memory zones for each 40 memories with
date and time
Pressure: 0 ~ 300 mmHg
Pulse rate: 30 ~ 180 beats/min
Pressure: within ± 3 mmHg
Pulse rate: within ± 5% of reading
2 X "AAA" Alkaline batteries (3 V)
1 minute after last key operation
+5°C to +40°C
< 85% RH
-20°C to +55°C
< 95% RH
Approximately 130 g
91(L) x 72(W) x 29(H) mm
70mm x 300mm
Over 18 years old
Internally powered equipment
Class II
Classification of type B
IPX0
Not suitable for use in presence of
flammable anaesthetic mixture with air
or with oxygen or nitrous oxide
Continuous operation with short-time
loading
to

Publicidad

Tabla de contenido
loading

Tabla de contenido