Using Automatic Needle Threader - Singer XL-580 Manual De Instrucciones

USING AUTOMATIC NEEDLE THREADER

Be sure to raise the presser foot lifter and raise the needle
to its highest position before threading.
1. Thread the machine with your left hand while gripping the
thread with your right hand.
guide on the needle bar and pull it toward you leaving
3. Pull thread gently into the thread cutter/holder to cut and
hold it in place.
4. Pull down the threading lever to its lowest position until the
twin thread guide rotates and stops.
5. Release the threading lever and needle will be threaded
automatically. If it should not return to the original position,
raise it gently by hand.
6. Pull thread loop away from you.
NOTE:
1
Thread guide
Threading hook
18
AUTOMATIQUE
1.
maintenir en place.
NOTE :
2
Twin thread guide
B
3
Thread cutter/holder
Cortador de hilo