Midas DL16 Manual De Instrucciones página 7

12
DL16
5.4 Split 1.3
SP 1
In Split 1.3 mode, the AES50 B outputs are not a copy of the AES50 A inputs. Instead, the 16 XLR inputs are sent to the first 16 channels of both the AES50 A and B
outputs. This mode is designed for the first device in a three-unit daisy chain where the analog inputs on stage need to be sent to two different consoles. Refer to
section 6 for more details.
Table 2: Split 1.3 mode routing
XLR in AES50 A in
1-8 9-16 1-8 9-16 17-24 25-32
XLR out 1-8
1-8
ADAT out
9-16
1-8
ULTRANET
out
9-16
1-8
9-16
17-24
AES50 A out
25-32
33-40
41-48
1-8
9-16
17-24
AES50 B out
25-32
33-40
41-48
5.5 Split 2.3
SP 2.3
In Split 2.3 mode, the 16 XLR inputs are sent to channels 17-32 of the AES50 B output (instead of to the first 16 channels, as in Split 1.3 mode). Split 2.3 mode
is designed for the second device in a three-unit daisy chain where the analog inputs on stage need to be sent to two different consoles. Refer to section 6 for
more details.
AES50 B in
33-40 41-48 1-8 9-16 17-24 25-32 33-40 41-48
Table 3: Split 2.3 mode routing
XLR in AES50 A in
1-8 9-16 1-8 9-16 17-24 25-32
XLR out 1-8
1-8
ADAT out
9-16
1-8
ULTRANET
out
9-16
1-8
9-16
17-24
AES50 A out
25-32
33-40
41-48
1-8
9-16
17-24
AES50 B out
25-32
33-40
41-48
5.6 Split 3.3
SP 3.3
In Split 3.3 mode, the 16 XLR inputs are sent to channels 33-48 of the AES50 B output (instead of to the first 16 channels, as in split 1.3 mode). Split 3.3 mode is
designed for the third device in a three-unit daisy chain where the analog inputs on stage need to be sent to two different consoles. Refer to section 6 for more details.
Table 4: Split 3.3 mode routing
XLR in AES50 A in
1-8 9-16 1-8 9-16 17-24 25-32
XLR out 1-8
1-8
ADAT out
9-16
1-8
ULTRANET
out
9-16
1-8
9-16
17-24
AES50 A out
25-32
33-40
41-48
1-8
9-16
17-24
AES50 B out
25-32
33-40
41-48
Quick Start Guide
AES50 B in
33-40 41-48 1-8 9-16 17-24 25-32 33-40 41-48
AES50 B in
33-40 41-48 1-8 9-16 17-24 25-32 33-40 41-48
13