Fanvil H4 Manual De Instrucciones página 5

Device installation
Please follow the instructions in below picture to install the device.
Bracket desktop installation
Connecting to the device
Please connect power adapter, network, USB, handset to the
corresponding ports as described in below picture.
① USB port: Connect USB device(Charge Only)
② Network port: connecting local area network or Internet.
③ Handset port: connect IP Phone.
④ Power port: connect the power adapter.
USB Internet
① ②
Network connect
Using Ethernet
1. The power on the device and connect the WAN port of the
phone to the RJ45 socket of a hub/switch or a router
(LAN side of the router) using the Ethernet cable.
2. The default is DHCP mode.
Using Wi-Fi (Configuration via Web)- (only H4W/H6W):
1. Log in web page > Network > Wi-Fi settings, check "Wi-Fi
Enable" and add Wi-Fi information.
Using Wi-Fi - (only H6W):
1.The power on the device and make sure the phone is idle.
2. Enter "#*107" to access the menu > Basic > WLAN, Enabled
the Wi-Fi Feature.
3. Press scan to search for currently available wireless network.
4. Enter the available network and select the Wi-Fi you want to
connect.
5. Press connect soft key and enter the appropriate password to
connect to the Wi-Fi. The default is DHCP mode.
Note: You can contact your service provider for additional settings that may be necessary to con-figure the phone, or download the user
manual and FAQ for more detailed information.
Handset DC 5V
③ ④
Configuration
Configuration via web
1. H4/H4W: Get the IP address:Press the "#" key for more than
6 seconds to broadcast IP.
H6/H6W: Get the IP address:Press the "#" key for more than
6 seconds,the network IP address information is displayed.
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment (The default
username and password are both 'admin'.)
3. Configure: Select network/account etc, and fill the relevant
content.
4. Save the configuration.
Making a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press
4. Memory key: press memory key.
Accepting a call
1. Using the handset: pick up the handset.
2. Using the handsfree: press
Programmable keys
1. Log in web page > Function key >
function and fill in the number in the value items.
2. Log in web page >Function Key > Speed Dial List , Select
memory key(number keys 0-9) and fill in the number in the
value items.
- 3 -
or vice versa.
.
DSS Keys, Select the