4.4.3. "SPEED LIMITER" mode
When starting the engine, the "SPEED LIMITER"
function is disabled. In order to activate it, it is nec-
essary to perform the following operations:
Press "SET" in order to access to "SPEED LIM-
ITER" mode. The maximum speed value shown on
4
the display (equal to the current speed of the vehicle)
starts blinking.
NOTE: The maximum speed may be
changed or set even during the use of the
vehicle.
Press "SET" for less than three seconds: the max-
imum speed value is decreased of 2 km/h with refer-
ence to the one shown on the display. On the other
hand, if you press "OK" for less than three seconds,
the maximum speed value is increased of 2 km/h with
reference to the one shown on the display.
OPERATION
- 46 -
4