MV Agusta BRUTALE 800 2020 Manual Del Usuario página 183

4.7. Driver's saddle removal
Remove the pillion as described in paragraph
§4.6.
Remove the two rear fixing screws and the rela-
ted spacers with a 4 mm hexagonal screwdriver. Lift
the saddle and remove it as shown in the picture.
4
In order to reassemble the above mentioned part,
you must perform the following operations:
• Replace the saddle;
• Reassemble the two rear fixing screws with the
related spacers;
• Reassemble the pillion as described in para-
graph §4.6.
WARNING
Every time you remove and refit the seat
and every time the vehicle is used, make
sure that the above mentioned part is cor-
rectly placed and that it is firmly secured
to the motorcycle framework.
OPERATION
- 82 -
4