Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
•
Before each use, check all hoses for cuts, leaks, abrasion
or bulging of cover. Check for damage or movement
of couplings. Immediately replace hose if any of those
conditions exist. Never repair a paint hose. Replace with a
conductive high-pressure hose.
•
Do not spray outdoors on windy days.
•
Always unplug cord from outlet before working on
equipment (electric models only).
1.4
SETUP ON AN UNEVEN SURFACE
The front end must always point downwards in order to avoid
sliding away.
If possible do not use the unit on an inclined surface since the
unit tends to wander through the resulting vibrations.
6
2
OVERVIEW
2.1
APPLICATION
Elite 2000 is an electric driven unit for the airless atomization of
different painting materials. Also it is able to feed the internally
fed paint roller, which is available as accessory.
Elite 2000 is made for jobs in the workshop and on the building
site.
The Elite 2000's device output is designed so that coatings can
be processed indoors and outdoors for small to medium-sized
objects.
2.2
COATING MATERIAL
MATERIALS THAT CAN BE SPRAYED
For use with interior and exterior latex, stains, lacquers, sealers,
enamels and primers.
No other materials should be used for spraying without TITAN's
approval.
Pay attention to the Airless quality of the coating
i
materials to be processed.
The unit is able to process coating materials with up to
15,000 mPas. If highly viscous coating materials cannot be
taken in or the performance of the unit is to low, the paint must
be diluted in accordance with the manufacturer's instructions.
Attention: Make sure, when stirring up with
i
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
ELITE 2000
Publicidad
