Publicidad
Idiomas disponibles
Idiomas disponibles
English
Usage
1. Once the telescoping wand is set up, connect the hose
to the pressure washer as described in your pressure
washer manual.
2. Start the pressure washer as described in your pressure
washer manual.
WARNING: Only extend the telescoping wand as
long as necessary for the work you are attempting
to do and remain in full control of the telescoping
wand at all times. Loss of control could result in
serious personal injury
Using Telescoping Wand (Fig. A, J)
iMPORTAnT: Before turning on the pressure washer unit,
disengage the trigger lock-off
1. Before attempting to use the telescoping wand
extend the telescoping pole(s)
of its available length:
a. Ensure you are wearing the harness
harness buckle
13
b. Ensure the telescoping wand is connected to a high
pressure hose and the pressure washer is running,
depress the trigger
to get a feel for how the telescoping wand
perform during use.
nOTE: The telescoping wand will kickback when the
trigger is squeezed and released. Before releasing the
trigger, move the nozzle at least 10 feet (3 meters)
away from the work surface.
2. Raise the telescoping wand
to be cleaned.
3. Disengage the trigger lock-off
4. Squeeze the trigger
3
5. When finished, place the telescoping wand
on the ground, to avoid damaging any components
or accessories.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can cause injury.
Storage
•
Store in a dry, covered location above freezing
temperature. sTORE inDOORs.
•
Always completetely empty water from high pressure
hose, pressure washer unit, nozzles, and spray wand.
6
4
and squeeze the trigger
8
to approximately half
11
with the
buckled to the wand buckle
3
to release a stream of water
1
and aim towards the area
4
.
.
1
gently
3
.
1
16
.
1
will
Publicidad
