GYS GYSFLASH 107.24 CNT FV Manual De Uso página 25

User manual
Advanced settings
This menu gives you access to the advanced features of your Gysflash.
+ Option
+ Options
Auto - Detect
Auto - Restart
Activated
Portability
This operation restores the original (factory) configuration of the Gysflash following any manual changes to
modes or parameters.
1
2
3
This action downloads a complete new factory configuration to the Gysflash.
The current configuration is then overwritten.
1
2
3
4
5
6
This action downloads the current Gysflash configuration to a USB stick.
1
2
3
4
Translation of the original
instructions
This menu is used to select whether or not to activate the Auto-Detect and
Auto-Restart functions.
Auto-detect function: With this function, the Gysflash automatically initiates a
charge when contact is detected on tAhe output. If this option («Auto-detect»)
is disabled, a contact on the output will only be detected using the «Auto-se-
lect» mode, and all other modes can only be initiated by a manual START.
Deactivated
Auto-restart option: This function allows the Gysflash to restart automatically in
the event of a power cut.
This menu is used to import, export, or initialize configurations for the gysflash.
Your GYSFLASH is equipped with USB connectivity that extends its functio-
nality by creating custom configurations on your computer that can then be
downloaded to the device via a simple USB stick. The custom configuration
allows you to add, delete or modify charging modes and profiles, so that your
charger can be adapted to your needs.
Restore CONFIG
Enter «Restore CONFIG» submenu.
Confirm the restoration of the configuration.
The Gysflash will then be restored to its original (factory) configuration.
Import CONFIG (.gfc)
First, make sure that the».gfc» file corresponding to the new configuration is present on the USB
stick. This file must not be located in a folder or subfolder of the USB stick.
Plug the USB stick into the Gysflash.
Enter the «Import CONFIG» submenu.
Select the relevant file to install.
Confirm file installation.
The Gysflash will then install the new configuration.
Export CONFIG (.gfc)
Plug the USB stick into the Gysflash.
Enter the «Export CONFIG» submenu.
Confirm that the configuration has been saved.
The Gysflash will then save the current configuration to the USB stick.
GYSFLASH 107.24 CNT FV
25