Publicidad
Do not use in potentially explosive atmospheres.
Do not use it in environments where combustible gases, vapours or solvents are
present, such as in vehicle fuel tanks or gas tanks.
Do not open the casing.
Do not carry out any unauthorised modifications.
Do not expose to strong heat, direct sunlight or open fire.
2.4.
DUTIES OF THE OPERATING COMPANY
The operating company must ensure that personnel who work on the product comply
with the regulations and provisions together with the following instructions:
National and regional regulations for safety, accident prevention and environ-
mental protection regulations.
No damaged products are assembled, installed or commissioned.
The necessary protective equipment is provided.
3.
Device overview
3.1.
PROBE
A
1 Probe cable with front-end camera
2 Bending neck – with LEDs and
camera chip
3 Camera head – lighting and image
capture
4 Control wheel – for adjusting and
bending the camera neck
5 Lock
3.2.
OPERATING BUTTONS
i
The LED on the button lights up when the function is activated.
Button
Designation
Image brightening mode Image brightness is increased. For use in
6 Boost button – for using the boost
function in poor lighting. The im-
age is enhanced
7 Rotation button – if pressed once,
the image is rotated by 90° clock-
wise.
8 Lock – the function buttons ➅ and
➆ are locked by pressing this but-
ton
9 Connecting cable
10 Connection
Function
areas where there is little illumination.
www.hoffmann-group.com
de
en
bg
cs
da
es
fi
fr
hu
hr
lt
it
nl
no
pl
pt
ro
sk
sl
sv
11
Publicidad
