GROUNDING INSTRUCTIONS
This appliance must be grounded� If it should malfunction or
breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock� This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug� The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances�
WARNING – Improper connection of the equipment-
grounding conductor can result in a risk of electric shock�
Check with a qualified electrician or service person if you
are in doubt as to whether the outlet is properly grounded�
Do not modify the plug provided with the appliance – if
it will not fit the outlet, have a proper outlet installed by a
qualified electrician�
This appliance is for use on a nominal 120 V circuit and has a
grounding attachment plug that looks like the plug illustrated
as the following photo� Make sure that the appliance is
connected to an outlet having the same configuration as the
plug� No adaptor should be used with this appliance�
GROUNDING PIN
EN
8
GROUNDED
OUTLET
For INDOOR household use ONLY�
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt
RSS(s)� Operation is subject to the following two
conditions:
(1) This device may not cause interference�
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device�
To satisfy FCC&ICRF exposure requirements, a
separation distance of 20 cm or more should be
maintained between the antenna of this device and
persons during device operation�
To ensure compliance, operations at closer than this
distance is not recommended�
Device Update
Typically, some devices are updated bi-monthly, but not
always so specific�
Some devices, especially those that went on sale more
than three years ago, will only be updated if a critical
vulnerability is found and fixed�