Descargar Imprimir esta página

Garant SB1 Manual De Uso página 39

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 106
Electrician
NOTICE
Incorrect mains voltage
System defect due to use with an incorrect mains voltage.
»
Operate the unit only with the mains voltage specified on the nameplate.
»
Use only the power supply unit supplied.
NOTICE
Inductive loads
Interference spikes in the power supply.
»
Do not connect to the same power supply as fluorescent tubes, welding sets, wire erosion machines or die sinking ma-
chines.
»
Use a separate electrical supply feeder for the setting bench.
»
If interference occurs, use an AC stabiliser or mains filter. Contact Hoffmann Group customer service.
1. Connect the light-current cable and power supply unit.
2. Insert the low-voltage plug into the socket on the outside of the housing. Plug in the monitor and tighten the screws.
3. Insert the mains plug into a mains socket.
5.1.
MONITOR
1. Release the fixing screws.
2. Adjust the monitor inclination at the ball joint.
3. Switch on the unit and initialise it [} Page 40].
4. Adjust the screen position [} Page 48].
5.2.
SCANNER
Standard product settings
i
Before first use, set up Honeywell scanner (art. no. 439930 1950GHD) once in combination with Setting Bench SB1.
1. Connect scanner with Setting Bench via USB connection.
2. Scan in "Standard product settings" barcode.
»
Scanner will be reset to factory settings.
3. Scan in "Serial USB" barcode.
»
Scanner settings are transmitted to the Setting Bench.
4. Switch to the System settings [} Page 47] menu.
5. Select "Print & Scan".
6. Select "Reset scanner" and follow the instructions on the screen.
6.
Operation
Trained person.
DANGER
Damaged or non-operational safety devices
Risk of fatal accident or serious injuries.
»
Do not use the unit with damaged, non-operational or bypassed safety devices.
»
Before using the unit, check the safety devices for correct operation.
»
Before using the unit, check it for obvious damage.
»
If it is damaged, switch it off immediately, secure it against being switched back on inadvertently, and inform the re-
sponsible office.
Serial USB
www.hoffmann-group.com
de
en
cs
da
es
fi
fr
hr
hu
it
lt
nl
pl
ro
ru
sl
sv
39

Publicidad

loading

Este manual también es adecuado para:

439900