BH PROACTION G-635 Manual Del Usuario página 15

4- FITTING THE ELECTRONIC UNIT
4.1 Release the 16 screws (T) located on the
underside of the monitor (P).
4.2 Slot the monitor's top casing (A) into the holes
(S) on the handrail (B)
Fig. 2
Fig. 3
4.3 Couple connectors C (coming out of the monitor's
top casing) and D (thick cable coming out of the metal
frame) together, as shown in Figure 4.
Fig. 4
4.4 Screw the earth wire (E) to the metal frame,
Figure 5.
ELECTRONICO G-635
Fig. 5
4.5 Align and attach the monitor's bottom casing
with the top and then screw both together using
screws (T), removed previously, or from the enclosed
bag (Fig. 6).
Fig. 6
16
16 29/9/04, 09:07