ACO LipuJet P-RB Instrucciones De Empleo página 103

2.19 Connect electrical consumers to terminal
box (for type - RM)
WARNING
Electric shock risk due to improper electrical installation
The terminal box must not be connected to the power supply until after all
installation work has been completed.
Work on electrical connections to power supply must be carried out by
qualified electricians only.
Electrical connections must be made according to circuit diagram
0150.78.58. The circuit diagram is enclosed with the terminal box.
Lay the connection cable from the high-pressure nozzle and the high-pressure pump to
the terminal box and connect to the terminal block according to the circuit diagram.
Please use the cable ducts provided for adjustment.
2.20 Connecting electrical consumers to the
control unit
WARNING
Electric shock risk due to improper electrical installation
The control must not be connected to the power supply until after all instal-
lation work has been completed.
IMPORTANT All plug connections (plugs and sockets) are adequately marked when
delivered. Confusion can be avoided if you pay attention to them.
Lay all connection cables to the control unit and plug in the connections. Please use the
cable ducts provided for adjustment.
LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
103/ 454