ACO LipuJet P-RB Instrucciones De Empleo página 64

LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
2.2.2 Assembly
IMPORTANT
Work should be carried out by 2 people.
Tighten the screw joints crosswise with a tightening torque of 20 N . m.
Assembly without clamps / Version 1
Insert the bottom section [ 7 ] into the
base [ 8 ] . Place the holes over the stud
bolts [ 10 ] .
Connect the screw joints
[ 10 ] , washer [ 3 ] and nut [ 2 ] ).
64/ 454
Washers and nuts are supplied as loose items.
Clamps (for temporary fixation of the sealing ring) can be obtained from ACO as
optional extras.
Heaviest single component is approx. 90 kg.
Numbers in brackets " [ ] ",
"Components".
Representation of the components _ Chap. 2.2.1
(stud bolt