Publicidad
Idiomas disponibles
Idiomas disponibles
2
Changing batteries
Loading batteries
1
Remove the battery cover.
2
Insert 2 new batteries (R03 [AAA])
following the (+) and (-) positions.
3
Adjusting clock
Setting the clock
Before you start operating the air conditioner, set the
clock of the remote controller using the procedures
given in this section. The clock panel on the remote
controller will indicate the time regardless of whether
the air conditioner is in use or not.
■
Initial setting
When batteries are inserted in the remote controller
the clock panel will indicate AM 0:00 and will flash.
COMFORT
SLEEP
1
TIMER
or
Press the TIMER
current time.
Each press of the TIMER button changes the
time in one minute steps.
Pressing the TIMER button continually changes
the time in ten minute steps.
2
SET
button
Press the SET
The current time is indicated and the clock starts.
3-EN
SWING
FAN
FIX
QUIET
Hi POWER
1
2
button
or
button to set the
button.
Removing batteries
1
Remove the battery cover.
2
Slap the batteries out lightly onto your palm.
Batteries
To replace the batteries, use two new batteries
●
(R03 [AAA]).
In normal use, the batteries will last about one year.
●
Replace the batteries if there is no receiving beep
●
from the indoor unit or when the air conditioner
cannot be operated using the remote controller.
To avoid malfunctions by battery leakage, remove
●
the batteries when not using the remote controller
for more than one month.
■
Adjusting clock
COMFORT
SLEEP
1
CLOCK button
Press the CLOCK
The CLOCK display flashes.
2
TIMER
or
Press the TIMER
current time.
Each press of the TIMER button changes the
time by one minute.
Pressing the TIMER button continually changes
the time by ten minutes.
3
SET
button
Press the SET
The current time is indicated and the clock starts.
– 3 –
SWING
FAN
FIX
QUIET
Hi POWER
2
3
1
by tip of a pencil.
button
or
button to set the
button.
Publicidad
